ZEISS
OPERATION
Axio Imager 2
Operating the motorized microscope via the touchscreen of the TFT display
146
430000-7544-001
01/2016
4.8.7.2
User configuration page
User-defined configurations can be created and
saved on this page. This page is password-
protected.
Once the user password has been entered, the
configuration of the user chosen on the
User
selection
page can be changed.
The following tabs are available for user
configuration:
−
HW Settings
Hardware settings
−
Settings
Change password
−
Buttons on left
Left drive knob
−
Buttons on right
Right drive knob
−
Docking station buttons
−
Favorites page
Select favorites page
(1)
HW Settings tab
As many as ten hardware settings can be assigned
to each user. Each setting may consist of a
combination of controllable microscope
components. The components available appear in
a selection list.
•
Click on the desired components.
Clicking on a component will save its current
status for the setting. If a different value is to be
saved, it must be changed using the buttons on
the stand or via the TFT before it can be saved.
•
To adopt the new value, press the
Update
button afterwards.
Fig. 169
Password query
Fig. 170
Microscope -> User -> User
configuration -> HW Settings
Fig. 171
HW Settings list
