ZEISS
OPERATION
Axio Imager 2
Operating the motorized microscope via the touchscreen of the TFT display
142
430000-7544-001
01/2016
4.8.6.2
Extras page
From the Extras page you can access the Light
manager, Contrast manager, Oil stop, Dazzle
protection, Ethernet and Miscellaneous tabs.
(1)
Light manager tab
This tab allows the user to switch the light
manager on and off.
The light manager automatically adjusts the light
intensity. For its uses, see Section 4.6.
Buttons beneath
Load light manager values
:
The
User-defined
button loads the values last
saved via the
LM set
button.
Pressing the
Default
button restores the factory
settings.
New transmitted light and reflected light filter set combinations (neutral-density, color and
neutral-density filters) are offered for second-generation Axio Imager 2 units. These filters are
fully integrated into the light manager functions. For the sake of clarity, the MTB 2011
configuration program writes those filters directly into the filter wheel, without the user having
to do so through the TFT. This is also an ACR-enabled component. This means that any
equipment mounted on it is automatically read out by the microscope during initialization. For
this reason, a filter wheel of this type can be installed on every stand without having to be
reconfigured.
(2)
Contrast manager tab
This tab switches the contrast manager globally
ON
and
OFF
. The contrast manager can be
switched off here if contrast-related motorized
components are not to be moved.
Fig. 161
Microscope -> Config -> Extras ->
Light manager
Fig. 162
Microscope -> Config -> Extras ->
Contrast manager
