OPERATION
Carl Zeiss
Docking station with TFT display
Axio Examiner
78
M60-2-0003 e 05/2012
(5) Language
In this tab, the user may select the language for the TFT display. German and English are available for
selection so far. Modifications to the basic setting will be applied after an automatic restart of the
equipment.
Tools
4.3.6.3
The
Settings -> Tools
page contains the
Ethernet
and
Miscellaneous
tabs.
(1) Ethernet
This tab allows settings for connecting the Axio Examiner via Ethernet.
(2) Miscellaneous
This tab enables the operator to calibrate the touch screen display.
About
4.3.6.4
The
Settings -> About
page only contains the
Firmware
tab.
This tab indicates the firmware version to the operator.
4.3.7
Display
Press the
Display
button in the navigation bar on the
Home
page to open the
Display
page. To darken
the TFT display, keep the
Display
button in the navigation bar pressed for more than a second. To switch
on the TFT display again, just touch any point on the display.
You may use the
Display
page to customize the brightness of the TFT display by pressing the
◄►
buttons.
Press the
Display off
button to switch the TFT display off. Touch this button again to switch the TFT
display on again.
After switching out, the TFT display returns from the
Display
page to the previous page from
which it was opened. The latter will be displayed when switched on again.
Summary of Contents for Axio Examiner
