ACCURA Installation site requirements
10
Intermediate storage/unpacking
After a desiccant is added, CMM assemblies are wrapped with an aluminum-coated foil and sealed (moisture protec-
tion).
–
Store the packed CMM assemblies at 5-40°C as close as possible to the installation site.
Note:
The CMM assem-
blies wrapped in foil must be stored in closed, dry rooms.
–
Provide a location to store the transport material and the packaging material.
NOTE
The shipping crates may only be opened by a ZEISS service engineer.
The foil may only be removed by a ZEISS service engineer.
NOTE
Packing materials such as disposable transport packaging for the covers, PC and accessories, foil or
Styrofoam chips can be returned to ZEISS if they are clean.
NOTE
ZEISS recommends storing the disposable packaging and the transport braces in a safe location (to
protect them against damage) in case the CMM has to be moved to another site at a later date.
Adaptation to room temperature
–
If possible, move the CMM assemblies to a storage location with an ambient temperature of at least +15°C 2 days
before the arrival of the ZEISS service engineer.
Relocating an installed CMM
NOTE
To avoid damage, the CMM may only be transported when a ZEISS service engineer is involved.
