33
User Manual | AURA handheld NIR – 2289-971 and 2298-955
Operation
AURA handheld NIR
6 Operation
6.1 Getting started
The AURA handheld NIR is delivered with a deactivated battery.
Place the battery in the battery charger to activate the battery.
Please charge the battery to full capacity before first use
(see “6.6 Charging the battery pack” on page 38).
You can start right away by plugging the charger cable into the socket on
the backside of the AURA handheld NIR (see Fig. 3 /
3
or Fig. 7 /
3
).
Insert a battery pack into the battery compartment of the AURA handheld
NIR, until the “Release buttons” snap in (see Fig. 12 /
1
“Exchanging the
battery pack” on page 37).
Push the “Power ON button” (see Fig. 2 /
6
or Fig. 6 /
6
).
After about 30 seconds the system will display the startup screen of
InProcess on the touchscreen (see Fig. 2 /
3
or Fig. 6 /
3
).
Note
The AURA handheld NIR is equipped with an embedded PC that
does not provide full access to Windows� All data exchange can
be done via InProcess�
