Zeiss 000000-1080-349, Instructions For Use Manual, Page: 196 / 278

Operation S100 / OPMI pico
Version 7.0
Page 196 G-30-1781-en
Requirements for connecting the network computer:
– You may need administrator rights to the network computer to
create a network share.
– You will need the Ethernet data of the archiving PC to configure
the network share.
– You can obtain the data required for the network share from your
IT Administrator.
• Enter the data and use "Apply" to activate the changes.
3 Streaming
You can stream live camera data to a network computer with little delay.
Depending on the receiver software, delays of less than 1 second are pos-
sible.
Prerequisites for Streaming:
– You need RTSP/RTP compatible receiver software in your compu-
ter of media device.
• Enter the data and use "Apply" to activate the changes.
4 Web control / Web interface*
The web interface with activated web control is a substitute remote con-
trol that uses a web browser.
When web control is activated, you can control the following functions
over the network at the computer:
– Manage patients and input or rename patients directly using the
keyboard (see Page 202)
– Delete files or patients
– Trigger the <Record>, <Capture>, <Live> and <Index> keys (see
Page 80)
– The image is displayed or the video is played via the DVI or YPbPr
monitor output, and not in the web browser.
If web control is deactivated, control is not possible. No header bar and
footer bar or notifications are displayed in the web browser (security func-
tion e.g. for universities).
Security recommendations for networking:
– You can deactivate the use of the network. Switch over to the UBS or dis-
connect the network cable.
– You can deactivate web control over the network.