Zeiss 000000-1080-349, Instructions For Use Manual, Page: 150 / 278

Operation S100 / OPMI pico
Version 7.0
Page 150 G-30-1781-en
• Select the "BLACK LEVEL" menu item in the "USER MENU ADVANCED"
menu using the control keys and press the "enter" key.
• Use the control keys to select "SETTINGS".
 The selection is displayed with an arrow.
• Change the black level value using the control keys.
• Press the "enter" key to save the changes.
 The selection is saved and you return to the "ADVANCED USER SET-
TINGS" menu.
If you do not want to save your changes, return to the "ADVANCED USER SET-
TINGS" menu via "CANCEL". The black level is set as it was when the submenu
was accessed.
ZOOM LEVEL submenu
In this submenu, you can set the zoom level of the camera in a range from
1.0x to 2.0x. To do this, proceed as follows:
• Select the "ZOOM LEVEL" menu item in the "USER MENU ADVANCED"
menu using the control keys and press the "enter" key.
• Use the control keys to select "SETTINGS".
 The selection is displayed with an arrow.
• Change the zoom level using the control keys.
• Press the "enter" key to save the changes.
 The selection is saved and you return to the "ADVANCED USER SET-
TINGS" menu.
If you do not want to save your changes, return to the "ADVANCED USER SET-
TINGS" menu via "CANCEL". The zoom level is set as it was when the sub-
menu was accessed.
PEAK / AVERAGE submenu
In this submenu, you can set the exposure control characteristics of the
camera in a range from 0 to +8. To do this, proceed as follows:
• Select menu item "PEAK / AVERAGE" from the "ADVANCED USER SET-
TINGS" menu using the control keys and press the "enter" key.
• Use the control keys to select "SETTINGS".
 The selection is displayed with an arrow.
• Change the value using the control keys.