Zeiss 000000-1080-349, Instructions For Use Manual, Page: 148 / 278

Operation S100 / OPMI pico
Version 7.0
Page 148 G-30-1781-en
PEAK / AVERAGE The setting "Peak / Average" is used to modify the lighting control character-
istics. A lower value results in peak value-based lighting control, which re-
sponds precisely to changes in the project brightness. A higher value sets
mean value-based lighting control, which responds less sensitively to changes
in brightness.
Executing setting options
RED submenu In this submenu, you can set the red value of the camera in a range from -20
to +20. To do this, proceed as follows:
• Select menu item "RED" in the "ADVANCED" menu using the control
keys and press the "enter" key.
• Select the "SETTINGS" menu item with the control keys.
 The selected choice is displayed with an arrow.
• Change the red value using the control keys.
• Press the "enter" key to save the changes.
 The selection is saved and you return to the "ADVANCED USER SET-
TINGS" menu.
• If you do not want to save your changes, return to the "ADVANCED USER
SETTINGS" menu via "CANCEL". The red value is set as it was when the
submenu was accessed.
The red value setting also influences the camera's white balance. see “Per-
forming the white balance (white bal)” on Page 165.
BLUE submenu In this submenu, you can set the blue value of the camera in a range from
-20 to +20. To do this, proceed as follows:
• Select the "BLUE" menu item in the "USER MENU ADVANCED" menu us-
ing the control keys and press the "enter" key.
• Select the "SETTINGS" menu item with the control keys.

The selected choice is displayed with an arrow.
• Change the blue value using the control keys.
• Press the "enter" key to save the changes.

The selection is saved and you return to the "ADVANCED USER SET-
TINGS" menu.
• If you do not want to save your changes, return to the "ADVANCED USER
SETTINGS" menu via "CANCEL". The blue value is set as it was when the
submenu was accessed.