25
5.8 BIKE+ all in one warning icons
Warning icons let you understand when there is something wrong with your
Bike+ all in
one
functioning (see 5). If you experience a problem that prevent you from using your
Bike+ all in one
correctly, please contact our customer care on our website or at info@
zehus.it! Icons can appear both yellow (warning) or Red (severe risk or damage).
The warning icons that can appear on your
bitride
app in the dashboard are:
Temperature WARNING
This icon appears when the temperature inside the hub reaches a critical level.
The system will automatically set the amount of power not to be damaged.
Connectivity WARNING
This icon appears when there is a connectivity problem with the bike. Even if
the Bluetooth is connecting to the bike, it could be possible to get this warning.
Please contact Zehus using the support section (see 6 on page 26).
Mounting WARNING
This icon appears when you mounted your Bike+ all in one upside down. Please
flip it by 180° horizontally. Please refer to 2.5 on page 10 for further information.
Slope sensor WARNING
This icon appears when the slope sensor is non calibrated correctly. Please per-
form the calibration procedure as described in 5.2.
Pedal sensor WARNING
This icon appears when there is a problem with the pedaling sensor. Please
contact Zehus using the support section (see 6 on page 26).
Charging WARNING
This icon appears when you are charging BIKE+ all in one.
