18. May 2021
© Copyright 2021, PROCEQ SA
9
4.8.1 Archive
Every measurement is stored in a measurement file.
These measurement files can be created, reopened,
viewed or deleted in the archive menu. All measurement
files are also accessible through USB.
New File
Creates a new measurement file with an individual name.
The filename must not be longer than 8 characters. If the
previous filename contains a number at the end of the
filename, the number is selected automatically when
creating a new file
Use
and
to select a character and
or
to select, add or delete a character. Please
consider that only capital ASCII characters and numbers are available. Confirm the new
filename with
or discard it with
.
Open File
This menu item allows to select an existing measuring file in order to add new measurements.
Choose the measurement file to proceed with from the list. Then the selected measuring file
will be loaded and the ZGM 1130 returns to the measuring window.
View Data
Measurements can also be viewed in a simple file
viewer. Open any indicated measurement file from the
list to navigate through the file. Use
and
to step
through the file in single steps.
and
jumps to the
end resp. to the beginning of the file.
Delete File
This function allows to delete whole measurement files from the ZGM 1130. Choose the
measurement file to delete from the list and confirm or decline. If the current measurement
file will be deleted, a new one named DEFAULT will be created automatically.
