27
EN
40005939
3. Using your appliance
3.1 Overview of the control panel
Your appliance is supplied with a built-in control unit and room thermostat for
temperature regulation.
Pilot wire / PLC base
mode
Frost
protection
mode
Eco mode
Boost
function
activated
Heating indicator /
Boost function
in progress
Comfort
mode
Electronic
Lock
The
ON
indicator appears each time the heating phase on your appliance is
active (ambient temperature is below the temperature setting on the thermostat).
+
button
-
button
LCD display
Boost
button
heating on/off
button
Mode
button
(simultaneous
press)
26
EN
40005939
When connecting the appliance to the mains, you must observe:
• the voltage indicated on the nameplate;
• conventional colour coding:
– blue or grey: neutral
– brown: live
– black: pilot wire
CONNeCTINg PRINCIPle WITh PIlOT WIRe:
Your appliance is equipped with a pilot wire for connection to a pilot wire
programming base unit (not supplied with the appliance).
NOTe:
Your appliance is equipped with an integrated electronic control system
so we cannot accept any liability should the appliance be used with pilot
wire programming base units that function by disconnecting the supply
voltage (refer to the instructions supplied with your control unit).
CONNeCTINg PRINCIPle WIThOUT PIlOT WIRe:
If the pilot wire is not connected, it must be insulated for safety reasons. Under
no circumstances must it be connected to earth.
N (blue or grey)
Neutral
Live
Pilot wire (base unit)
Live
Neutral
L (brown)
Pilot wire (black)
Pilot wire (black)
L (brown)
N (blue or grey)
Summary of Contents for 40005939
Page 58: ...114 PL 40005939 ...
