GWA_12Z1
REV. 1, 12/17
3
Introduction
Thank you for purchasing Zeggo Wireless Gateway. This device acts as a centralized sensor data
receiver. It collects wireless signal from nearby sensor transmitter and repeaters, processes them and
uploads data
to Zeggo’s portal for monitoring data and triggering notifications.
It must install at very
first to create a secure wireless network and allow other devices to join. It requires stable internet
access to send data over to the portal.
In this package you will find:
•
One Gateway GWA_12Z1
•
One Power Adapter
•
One User Manual
This device is the most important devices in the system. It establishes a unique secure network which
enable wireless communication takes place.
The gateway features:
•
Various internet access options, WIFI, ethernet, 3G/4G (USB Dongle)
•
Established Unique Network ID protected with AES-128 key
•
Process up to 80 incoming signals per minute
•
Automatic Backup Data during Internet down (USB Memory Storage Stick must Insert)
Specification
Input Power
9-15VDC ~500mA
Power Consumption
<5W
Protection
Voltage Surge Suppression & Overcurrent Protection
Signal Input
Wireless signal from Zeggo Transmitters/ Repeater
Internet Access
Ethernet, WIFI, 3G/4G*
1
Radio Frequency
ISM 2.4Ghz
Range of Transmission
Up to 60m Indoor and up to 300m under line of sight
(Depends on site condition)
Peripheral
1* USB port (Extendable)
Operating Condition
20°C to 60°C (For in door usage only)
Size
5.1” x 3.
4
” x 1.
2
”
*1: USB Dongle is required to enable to functionality
