Zefon
Z-Lite
™
IAQ DC Powered Sampling Pump
Description
The Zefon Z-Lite IAQ DC Sampling pump is designed for use with various IAQ sampling devices at
flows of 5-20lpm
Specifications
Flow Range:
5-20 lpm
(low backpressure spore traps, such as Air-O-Cell, MoldSnap, or Z5)
2-8 lpm
(carpet sampling cassettes)
Flow Meter:
2-30 lpm display range with +/- 2% Accuracy
Battery Run Time:
2.5 to 3 hours
Battery Charge Time:
Approximately 3 hours
Battery:
12v, 7.5 Ah Sealed Lead Acid
AC Power:
100-240v 50/60Hz AC power transformer/charger
Housing Dimensions:
15” (38cm) L x 9” (23cm) W x 10.5” (27cm) H
Sampling Stand Height:
Telscoping from 12.25” to 36” from the top of pump
Overall Weight:
18.8lbs (8.5kg)
(including charger and sampling stand)
Operating Instructions
Cautions and Warnings
1. Do not run the pump without the tubing and quick disconnect plug installed.
2. Do not use this pump for any purpose other than sampling with low backpressure spore trap
cassettes or carpet sampling cassettes. Use of this pump for other types of sampling, such as for
asbestos, will cause premature failure and void the warranty.
3. Do not use of any AC power adapter or battery charger other than the one supplied.
4. Do not submerge the pump or subject the pump to any liquid.
5. Always follow basic safety precautions when using this product to reduce risk of injury, fire or
electric shock.
Limited Warranty
Zefon
International warrants this pump to be free of defects in parts or workmanship for a period of
1 year from date of purchase.
Zefon
will without charge repair or replace, at its option, the defective
pump or component parts upon delivery by the customer to
Zefon’s
repair facility.
This limited warranty covers defects in workmanship and material. It does not apply to:
1. Product damage by accident or weather related circumstances
2. Misuse or abuse of the product, including damage from impact, cord damage or water damage.
3. Lack of proper care and maintenance
4. Failure to follow instructions
5. Any type of unauthorized repair attempts or modifications.
Do not remove the inner pump housing tray or attempt to make repairs. Damage may occur to the
pump and all warranties will be immediately voided.
If it should become necessary to return the pump for service, please call Zefon at 352-854-8080 for
a return authorization number and return instructions. Please be prepared to provide us a description
of the problem when calling. The sender is responsible for shipping charges, freight, insurance and
proper packaging to prevent damage in transit.
A return authorization number must be issued
prior to shipment and must be marked on your shipment.
Disclaimer
Zefon
shall not be liable for direct, indirect, consequential, incidental or other damages resulting
from the sale or use of any goods including lack of use due to equipment failure.
Zefon’s
total
liability shall be limited to repair or replacement of the product.
Zefon
assumes no responsibility whatsoever to any party whosoever for any property damage,
personal injury or death received by or resulting from, in whole or in part, the improper use or
storage of this product by the user, person, firm, entity, corporation or party not adhering to the
instructions and warnings in this manual.
5350 SW 1st Lane, Ocala, FL 34474 USA
Tel: 352-854-8080; Fax: 352-854-7480; www.zefon.com
Maintenance
This pump comes equipped with an exhaust filter located on the inside tray of this unit. It is recom
-
mended to replace this filter every 3 months or if a loss of performance of the pump is observed. Your
filters may last longer or need to be changed more frequently depending on the amount of use the
pump gets and the environments it is exposed to. Replacement filters may be ordered from Zefon or
a Zefon distributor under product #03879.
Proper care and maintenance of your pump is essential for a long useful life. Rough and abusive use
and/or accidental impacts may damage the unit.
Zefon
recommends periodically wiping down the unit
with a clean dry cloth to keep it free of dirt and debris along with regular inspections of the AC power
supply and cords to ensure it is not damaged and posing an elecrical hazard.
LA03031 Rev. 3
