ZyPerUHD60
c.
Reboot via the Reboot command button
3.
Set HDMI audio output to the received Dante stream. (RX mode)
a.
e e_a_out_src_sel::addon
4.
Set HDMI audio output to the native stream received from encoder. (TX or RX mode)
a.
e e_a_out_src_sel::native
Encoder Dante Commands
1.
Set Encoder to Dante Transmit mode
a.
astparam s a_bridge_en n
b.
astparam save
c.
Reboot via the Reboot command button
2.
Audio Select in Transmit mode (Default is Auto)
a. e e_a_input::
SOURCE
SOURCE values can be “auto | hdmi | analog”
3.
Set Encoder to Dante Receive mode.
(Receive Dante and output to UHD60 domain)
a.
astparam s a_bridge_en y
b.
astparam save
c.
Reboot via the Reboot command button
Note:
If Encoder is in the Receive mode, the UHD60 will not have any
audio feed to send unless the encoder is actively receiving Dante audio from
another source.
Rev: 20231115
Page
of
46
77
User Manual
