ZyPerUHD60
System Elements
Encoder Function
The function of the ZyPerUHD60 Encoder Device (Encoder) is to accept audio and video data
over a variety of interface types, and translate that data to a format suitable for transmission
over a standard 1Gb Ethernet network.
Video data is segmented, compressed using JPEG2000, prepared for transmission, and sent by
the Encoder unit. No unit other than those so designated by the control entity shall be able to
receive the video stream sent by an Encoder.
The format of the IP data is fully in compliance with industry-standard IEEE 802.3 Ethernet
networking practices. Any switch or device capable of passing 1Gb Ethernet traffic can be
employed to carry ZyPerUHD60 A/V traffic.
Other ports on the Encoder devices are for the carriage of USB, IR, RS232 and audio data.
Interfaces on Triple Input Dual LAN Encoders: Rev 2E, Rev 2EA and Rev 2EMP
•
Power Input (20VDC)
•
RS232 Input/Output (Phoenix connector with supplied adapter)
•
Analog Audio Input/Output (Phoenix connectors with supplied adapters)
•
Infrared Input/Output
•
2x HDMI Inputs and 1x USB-C Video Input
•
HDMI Output (loop-out)
•
USB Host Type-B interface
•
1Gb Ethernet port (RJ45 with PoE)
•
1Gb Ethernet port (RJ45) Dante or Utility
Interfaces on Single Input Single LAN Encoders: Rev 0E and Rev 0EA
•
Power Input (12VDC)
•
RS232 Input/Output (Phoenix connector with supplied adapter)
•
Analog Audio Input (3.5mm jack)
•
Analog Audio Output (Phoenix connector with supplied adapter)
•
Infrared Input/Output
•
HDMI Input
•
USB Host Type-B interface
•
1Gb Ethernet port (RJ45 with PoE)
Interfaces on Single Input Single LAN Encoders: Rev 1E and Rev 1EA
•
Power Input (12VDC)
•
RS232 Input/Output (Phoenix connector with supplied adapter)
•
Analog Audio Input/Output (Phoenix connects with supplied adapter)
•
Infrared Input/Output
•
HDMI Input
Rev: 20231115
Page of
6
77
User Manual
