www.zeeltronic.com
updated 17.10.2016
program version: 01.250711
USER MANUAL
PCDI-VE1 PROGRAMMABLE CDI IGNITION
Ignition controller is specially designed for Vespatronic flywheel magneto.
Very important!
Resistor spark plugs must be used, because they produce less electromagnetic disturbances.
TECHNICAL DATA
Limit values:
- minimum revs
200 RPM
- maximum revs
20000 RPM
- minimum supply voltage
8 Volts
- maximum supply voltage
16 Volts
- max. supply voltage for 1 minute
35 Volts
- current draw
25 mAmp
- maximum continuous current for shift light output
1 Amp
- peak current for shift light output
5 Amp
Circuit is protected against reverse supply voltage (wrong connection).
Features:
- CDI charged from hi voltage charging coils (generator)
- running from stator without pickups
- store and load function for 2 ignition maps
- external switch for changing ignition map while riding
- shift light output
- quick shift (shift kill)
- tachometer output
- advance/retard whole ignition curve
- three stage rev limit (retard timing, reduced spark, spark off)
- timing compensation curve
- timing calculation for every 1 RPM change (1000, 1002, .. , 9805, 9806, ...)
- easy and fast programming on the field, via hand held programmer
- programming while machine running - you can immediately see effects
- monitoring of rev's, ignition, via LCD(hand held programmer)
- fast processing for high accuracy - delays from 1us
1
