background image

All warranty claims shall be decided at the discretion of Zed Audio Corporation or an 
appointed representative.

Zed Audio Corporation reserves the right to make changes and/or improvements upon it’s 
products. We do not assume any obligation to install such changes and/or improvements 
to existing equipment previously manufactured.

                                        

Zed Audio Corporation,

 

743 Cochran Street

                                                 Suite D

 Simi 

Valley

 

Ca 93065 USA

 

Email     [email protected]

 

Website  www.zedaudiocorp.com

 

Tel          (805) 526-5315

    

15 

day return policy

Zed Audio Corporation offers a money back guarantee for any of the products described 
in this manual. This 15 day money back guarantee has the following stipulations attached 
and we shall not deviate:

Every product built by Zed Audio goes through a series of exhaustive tests and so we are 
100% sure that each and every product meets the advertised specifications. Please have 
a qualified person check the installation if for some reason there seems to be something 
not functioning correctly, or feel free to contact us and we shall attempt to solve the 
problem.

The product must be returned with a copy of the original sales invoice.
The full purchase price shall be refunded less the original freight amount.
For any damaged or missing parts on the amplifier, including packaging materials the 
replacement thereof shall be deducted from the refund amount including the labour to 
replace these parts.
Amplifiers cannot be returned for reasons other than non performance of the amplifier.

PLEASE READ THIS CAREFULLY AND BE SURE THAT IF AN AMPLIFIER IS 
RETURNED AND WE FIND DAMAGED PARTS, THESE CHARGES WILL APPLY

So please retain all packaging materials and documents in case the product is returned 
for a refund.
Zed Audio is not responsible for the freight from the consumer to Zed Audio when our 
refund option is exercised.

The product must be returned with a copy of the original sales invoice.
The full purchase price shall be refunded less the original freight amount.
For any damaged or missing parts on the amplifier, including packaging materials the 
replacement thereof shall be deducted from the refund amount including the labour to 
replace these parts.
Amplifiers cannot be returned for reasons other than non performance of the amplifier.

PLEASE READ THIS CAREFULLY AND BE SURE THAT IF AN AMPLIFIER IS 
RETURNED AND WE FIND DAMAGED PARTS, THESE CHARGES WILL APPLY

Page 40

Summary of Contents for Kronos













































Reviews: