zebris PDM, Specification And Operating Instructions

Page: 8 / 42

zebris Medical GmbH PDM/PDM mobile Technical Data and Operating Instructions Page 8/42
2.3
User Obligations

The relevant, general guidelines and/or national laws, national regulations and technical
rules for the commissioning and the operation of measuring systems must be applied
and fulfilled corresponding to the indicated purpose of the zebris product.

Users are obliged to:

Observe all safety guidelines of the user manual.

Carry out any inspection and maintenance works on a regular basis as stipulated in
the user manual.

Only use work equipment that is free of defects.

Check the functional safety and the proper condition of the device before operating.

Make all user manuals that are included in delivery and part of the measuring sys-
tem accessible to all users at all times and keep the manuals in close proximity of
the measuring system.

Protect him-/herself, the patient or third parties against dangers.

Avoid a contamination through the product.

When using the system, national legal regulations must be observed, in particular:

The valid industrial safety regulations.

The valid accident prevention.

For the safety, reliability and performance of the components delivered by zebris, re-
sponsibility is assumed, if:

Assembly, extensions, re-settings, changes or repairs were carried out through
zebris or third parties authorised by zebris, trained technicians or employees of au-
thorised dealers. Storage and transport are only to be effected in the original pack-
aging delivered by the manufacturer.

The device is operated in accordance with the user manual.

In case of repair, the regulations of the VDE 0751-
1 “Recurrent test and test before
commissioning of medical electrical equipment
– general regulations” are fully com-
plied with.

The components of information technology provided by the operator correspond to
the technical requirements of hard and software included in this user manual and
also were installed and set up according to the relevant descriptions in this user
manual.

The set-up room corresponds to the given environmental conditions of the measur-
ing system and the valid installation regulations.

The PDM system including accessories is connected to the mains socket with a pro-
tective grounding conductor and is operated with the correct mains voltage.

Exclusively the software provided by zebris as well as the components and acces-
sory parts listed in this user manual are used together with the system.