zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 41/54
5.6
Closing the safety lock of the plug tray
Finally connect the USB socket in the connector compartment and a free USB interface of
your computer by using the provided USB cable. Your measuring system is now ready for
use. The control of a measurement exclusively is carried out via the zebris FDM software.
Therefore, please carefully read the zebris FDM user manual.
If the power supply unit and the USB cable are connected to the sockets of the platform,
please close the lid of the safety lock and fasten it to the housing by means of the four
screws supplied with the platform.
5.7
Setting the system out of operation
In order to set the system out of operation please close the WinFDM software first, then exit
the Windows operating system and shut down the PC. In the next step disconnect the power
supply unit of the FDM sensor and the treadmill from mains supply.
safety lock
