Zebra-Tech Hydro-Wiper L, Installation And Operation Manual, Page: 8 / 16

Hydro-Wiper Installation and Operation Manual
| 6 |
Electrical cable
The Hydro-Wiper L is fitted with 1 meter of cable between the wiper body and control
housing as standard. However, the length of cable required varies depending on the type
of installation. Additional cable can be fitted at the factory when the Hydro-Wiper is built.
Please specify the cable required when ordering.
Field tool kit
The field tool kit supplied with the Hydro-Wiper L contains:

Lid shifting tool

O-ring pick

Spare control housing O-ring

O-ring grease

Replacement set of batteries

Screwdriver for adjusting the wipe interval switch.