background image

 

S

ERVICE  

G

UIDE

Preface 

Important Notice 

 
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of 
merchantability or fitness for a particular purpose.  We are not liable for any errors contained herein or incidental or 
consequential damages in connection with furnishing, performance or use of this material. 
 
This material is for internal purpose only. No part of this document may be reproduced, transmitted, stored in a 
retrieval system, transcribed, or translated into any language or computer language in any form or by any means 
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without express written consent and 
authorization. 
 
We have taken reasonable measures to provide information in this manual that is complete and accurate. However, 
the material in this guide is for information only; we reserve the right to make changes in product design without 
reservation and without prior notification.  For the latest revision please contact your distributor.  
 
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners. 
 
Copyright © 2017.  All rights reserved. 
 

Radio Notice 

This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance 
with the instructions in this manual, it may cause interference to radio communications. The equipment has been 
tested and found to comply with the limits for a Class A computing device pursuant to EN55022 and 47 CFR, Part 2 
and Part 15 of the FCC rules. These specifications are designed to provide reasonable protection against 
interference when operated in a commercial environment. 
 

Radio and Television Interference 

Operation of this equipment in a residential area can cause interference to radio or television reception. This can be 
determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or 
more of the following measures: 
- Reorient the receiving antenna. 
- Relocate the device with respect to the receiver. 
- Move the device away from the receiver. 
- Plug the device into a different outlet so that the device and the receiver are on different branch circuits. 
If necessary the user may consult the manufacturer, and authorized dealer, or experienced radio/television 
technician for additional suggestions. The user may find the following booklet prepared by the Federal 
Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet 
is available from the U.S. Government Printing Office, Washington, DC 20402 U.S.A., Stock No. 004000003454. 
 
 
 

For CE-Countries 

 
This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit 
should be used in order to maintain CE conformance. 
 

This manual is in A4 format. Please check your printer setting before printing it out.

Z-3272 Service Guide  

2 / 11

Summary of Contents for Z-3272












Reviews: