18
s
repeatedly. The v character, when selected and
s
pressed, acts as <escape> to the next menu.
3.
Press
s
to delete the target digit. The digit is
deleted and its now-blank position is selected. To
move the selector one position to the left, press
s
again. The digit in the next position to the left is
selected.
4.
To write (or overwrite) a digit,
position left selector
in the required position (by deleting and writing dig-
its), then use the
v
and
^
keys to select the
desired new digit from the right-hand menu.
5.
Press the
s
key to enter. The digit appears on the
left in the previously selected position and the cursor
advances right to the next position (except when
writing the rightmost digit, in which case the cursor
stays there).
6.
When MMDDYY is set, press the
f
key to jump to
HHMMSS setup. Following 24 hour format, the pro-
cedure is similar to setting MMDDYY.
7.
When finished, press the
f
key to escape.
Summary of Contents for Z-1060
Page 1: ......
Page 26: ...22 DIMENSIONS Figure 11 PDC Dimensions...
Page 27: ...23...
Page 28: ...Part no MUL 53250 01...
