Solo documento principale.
Ident
ific
at
ion:
M
D
-AL
-GI
-00
R
ev
. 4
.0
of
31.
01.
18
–
A
ppl
ic
at
ion:
G
ID
Pile Reg. IT12110P00002965 -
Share Capital € 100,000.00 fully paid up
AR Bus. Reg. no. 03225010481
– AR REA no. 94189
ISO 9001 Certified company - Certificate no. 9151 - CNS0 - IT-17778
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
tel. +39 055 91971 - fax. +39 055 9197515
[email protected] - [email protected] -
zcsazzurro.com
Manual of 25/05/2020 Rev. 1.0 “User Manual 22K-BE-24”
40/44
8.3.
End of charging
When the electric vehicle is fully charged, the charging will stop and the charging LED will turn solid
green. To interrupt the charging, depending on the mode selected, scan the RFID card for a second
time. If the card is not scanned, the charger will not recognise the end of the charging process and will
not allow the connector to be disconnected from the charging socket (electric vehicle). Another way to
stop the charging is to end the session from the side of the electric vehicle. After the connector has
been disconnected from the vehicle side, the charging session is interrupted and the connector can be
automatically disconnected from the charger side as well.
9.
Technical datasheet
TECHNICAL SPECIFICATIONS
ZEV-7000-BE-24
ZEV-AC022K-BE-24
AC Input data
Type of connection
Single-phase (1PH + N PE)
Three-phase (3PH + N PE)
AC input voltage
230V +/- 10%
400V +/- 10%
AC input frequency
50Hz
50Hz
AC Output data
AC output voltage
230V +/- 10%
400V +/- 10%
Maximum AC output current
32A
32A
Maximum Power
7kW (can be limited via software)
22kW (can be limited via software)
General data
Housing material
Plastic PC940
Galvanised steel
Front panel
Tempered glass
Tempered glass
Installation
To wall / On support
To wall / On support
Connector
Charging socket Type 2 – cable not
included (optional)
Charging socket Type 2 – cable not
included (optional)
LCD screen
Graphic screen
Graphic screen
Controls
4 touch buttons – emergency button –
RFID contact
4 touch buttons – emergency button –
RFID contact
RFID card
2 included
2 included
Energy Meter
MID Certificate
MID Certificate
RCD protection
Type A + 6mA DC
Type A + 6mA DC
Protection Class
IP54
IP54
Cooling
Natural convection
Natural convection
Environmental Data
Operating temperature
-30°C / +50°C
-30°C / +50°C
Humidity
5% / 95% non-condensing
5% / 95% non-condensing
Maximum operating altitude
2000m
2000m
Installation
Indoor / Outdoor
Indoor / Outdoor
Safety protections
Integrated protections
Over and under voltage, power
overload, short circuit, dispersion
currents, missing ground connection,
surge, over and under temperature
Over and under voltage, power
overload, short circuit, dispersion
currents, missing ground connection,
surge, over and under temperature
Applicable safety standards
IEC 61851-1: 2017, IEC 62916-2: 2016
IEC 61851-1: 2017, IEC 62916-2: 2016
Warranty
2 years
2 years
Dimensions and accessory parts
Dimensions (H x L x D)
356mm x 221mm x 136mm
452mm x 295mm x 148mm
Weight
3kg
10kg
Accessories
Communication gateway
Communication gateway
