Main Document Only.
49/50
Identification: MD-AL-GI-00
Rev. 1.0 07.06.21 - Application: GID
Connext User Manual
Rev. 1.2 07/06/2021
9.
Dismantling and disposal
The packaging materials are compatible with the environment and can be recycled. Therefore, they
can be disposed of in special recycling containers in accordance with the local waste disposal
regulations. However, the device cannot be disposed of as household waste, but must be treated as
special waste. It must be disposed of at facilities authorised to dispose of electrical and electronic
goods. For more detailed information on the disposal and recycling of this product, please contact
the local competent office, waste disposal service or the retailer where you purchased the charger.
1)
Uninstalling
•
Disconnect the AC mains supply
•
Remove any communication connections
•
Remove from the DIN bar support
2)
Packaging
If possible, pack the system in its original packaging.
3)
Storage
Store the system in a dry place where the ambient temperature is between -25°C and +60°C.
4)
Disposal
Zucchetti Centro Sistemi S.p.a. is not liable for the disposal of the equipment, or parts thereof, that
does not take place according to the regulations and standards in force in the country of
installation.
The symbol of the crossed-out wheeled bin indicates that the equipment, at the end of its useful life,
must be disposed of separately from household waste.
This product must be handed over to the waste collection point in your local community for
recycling.
For more information, please contact the waste collection authority in your country.
Inappropriate waste disposal could have negative effects on the environment and on human health
due to potentially hazardous substances.
With your cooperation in the correct disposal of this product, you contribute to the reuse, recycling
and recovery of the product, and to the protection of our environment.
Summary of Contents for CONNEXT
Page 1: ...ACCESSORY CONNEXT ...
Page 52: ......
