Main Document Only.
23/50
Identification: MD-AL-GI-00
Rev. 1.0 07.06.21 - Application: GID
Connext User Manual
Rev. 1.2 07/06/2021
Figure 11 – Preparing the RS485 cables
2)
Connect the 2-pole cable to the port of the hybrid inverter marked “RS485”. Follow the
polarity shown in the figure and the pinout in the table.
Figure 12 - Connections on single-phase hybrid inverter
Pin RS485
24-pin terminal block
RS485 + (Red)
9
RS485 – (Black)
10
Table 8 - RS485 connections to hybrid inverter
4.3.2.
Connecting to 3000SP inverter
To connect the RS485 port to 3000SP inverters, follow these instructions.
1)
Remove a suitable length of the protective sleeve, as shown in the figure (A: 80~100 mm B:
6~8 mm).
CAN
485m 485s
Summary of Contents for CONNEXT
Page 1: ...ACCESSORY CONNEXT ...
Page 52: ......
