Solo documento principale.
26/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
5.2.
Configuration 2
–
System with Azzurro 3000SP inverter
THE SENSOR (OR SENSORS) FOR MEASURING THE EXCHANGE MUST BE CONNECTED TO THE
INVERTER ACCORDING TO THE MANUAL
Figure 18 - Configuration 2 with 3000SP retrofit inverter
Follow the instructions to connect the RS485 port to 3000SP inverters.
1)
Remove a suitable length of the protective sleeve, as shown in the figure (A: 80~100 mm B:
6~8 mm).
Figure 19
–
Preparing RS485 cables
