Zcom ZAC Series, User Manual

Page: 85 / 109

P. 85
automatically select the highest available rate to transmit. In some cases, however, like where
there is no great demand for speed, you can have a relatively-low transmit rate for compromise of
a long distance.

Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
802.11a transmissions. However, it may decrease wireless network performance. Compared to
CTS-Self; the transmission amount of CTS-RTS is much lower.

Enable MAC Clone
Available only under wireless client mode, it hides the MAC address of the AP while displays the
one of associated wireless client or the MAC address designated manually.

Site Survey
Under wireless client mode, the IEEE 802.11n ZAC Wireless CPE is able to perform site survey,
through which, information on the available access points will be detected.
Open “
Basic Settings
” in “
Wireless
”, by clicking the “
Site Survey
” button beside “
Wireless
Mode
” option, the wireless site survey window will pop up with a list of available AP in the vicinity.
Select the AP you would like to connect and click
“
Selected
” to establish connection.
VAP Profile Settings
Available in AP mode, the IEEE 802.11n ZAC Wireless CPE allows up to 16 virtual SSIDs on a single
BSSID and to configure different profile settings such as security and VLAN ID to each SSID. To create a