SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 6
Physical Ports
2.3.
The following physical ports are available on the SP230/SP230-S5.
The following table describes the physical ports that are available on the AP from left to right.
Port
Description
WAN/PoE Port
The WAN/PoE port operates at 10/100/1000 Mbps supports an RJ45
connection. Supporting PoE In, the AP can receive power through the WAN
port from PSE (Power Sourcing Equipment), rendering the need for a power
supply into the power port.
LAN Port
The LAN port operates at 10/100/1000 Mbps at supports an RJ45 connector.
Supporting PoE Out, the LAN port can supply PoE power to PDs (Powered
Devices) plugged into the LAN port. Up to 10 Watts output power can be
supplied.
Grounding
Access point that can't find its way to local earth ground will transfer to the
interior equipment over the communication and power cable.
LED Indicator
2.4.
The following table describes the AP status referring to different LED behavior.
Color
Behavior
Description
Red
Steady
Initializing
Flashing
Power / system on
Green
Steady
Internet connection detected
Flashing
No internet connection detected
