background image

zBoost

®

 TRIO Xtreme ZB575X Manual

ii

 

About zBoost

®

 

zBoost

, the leader in cell phone signal boosters, manufactures an award-winning line of cell 

phone signal boosters that enhance the performance of your cell phone, smartphone and 

wireless data card.

Uses patented technologies

 and protects the carrier networks.

1-year manufacturer warranty

 – register your product at 

www.zBoost.com

.

Industry Canada Regulations

IC ID: 5544A-ZB570TRIVLT, 5544A-ZB570TRIALT

This Class B digital apparatus meets all requirements of the Canadian Interference Causing 

Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not 

cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation.
The term “IC:” before the radio certification number only signifies that Industry Canada technical 

specifications were met.
RF Exposure: The manufacturer’s rated output power of this equipment is for single carrier 

operation. For situations when multiple carrier signals are present, the rating would have to be 

reduced by 3.5 dB, especially where the output is re-radiated and can cause interference to 

adjacent band users. This power reduction is to be by means of input power or gain reduction and 

not by an attenuator at the output of the device.
Cet appareillage numérique de la classe [B] répond à toutes les exigences de l’interférence 

canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions 

suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter 

n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée.
Le fabricant nominale de la puissance de sortie de ce matériel est simple transporteur. Pour les 

situations lorsque plusieurs signauxporteurs sont présents, l’évaluation devrait être réduite de 

3.5 dB, en particulier lorsque le signal de sortie est ré-émise et peut provoquer des interférences 

adjacentes à la bande utilisateurs. Ce pouvoir est de la réduction par le biais de la sortie 

d’alimentation ou la réduction de gain et non par un atténuateur à la sortie du dispositif. 
Please note: This unit has been approved for use in Canada under RSS 131, however, consent 

for the use of this device to improve cellular or PCS coverage, must be obtained through your 

cellular or PCS provider, prior to placing the unit in operation. Please refer to the Industry Canada 

document CPC 2-1-05, Section 6.1 available or viewable at:  

http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf08942e.html

Copyright Notice

This manual is copyrighted. All rights reserved. This manual, whole or in part, may not be copied, 

photocopied, reproduced, translated or reduced to any electronic medium or machine readable 

form for distribution. This manual whole or in part, may not be modified without prior consent, in 

writing, from zBoost. 

Copyright © 2014 by zBoost.

Trademarks

Wireless Extenders, Wi-Ex, the Wi-Ex logo, zBoost, the zBoost logo and Extending Cell Zones are 

registered trademarks of zBoost.

Summary of Contents for ZB575X-A























Reviews: