background image

zBoost

®

 YX560SL User Guide

12

zBoost

®

 YX560SL User Guide

13

Limited 2 Year Warranty

Register your product at www.Wi-Ex.com

Wi-Ex® warrants every Wi-Ex® product to be free from defects in material and workmanship under 

normal use for the warranty period of two years. 

Who Is Covered?

You must have proof of purchase to receive warranty service. A sales receipt or other 

documentation showing the product purchased and the purchase date is considered proof of 

purchase. This limited warranty extends only to the original consumer purchaser or any person 

receiving the product as a gift from the original consumer purchaser and to no other purchaser or 

transferee. This warranty does NOT extend to commercial users.

What is Covered?

Warranty coverage begins the day you purchase the product. For one year from the original 

date, the Wi-Ex®  Cell Phone Signal Booster will be repaired or replaced with a new, repaired, 

refurbished or comparable product (whichever is deemed necessary by Wi-Ex® ) if it becomes 

defective or inoperative. The exchange will be made without charge to you for parts and labor. You 

will be responsible for the cost of shipping to the location designated by Wi-Ex®. 

All products, including replacement products, are covered only for the original warranty period. 

When the warranty on the original product expires, the warranty on the replacement product also 

expires.

What is Excluded?

Your warranty does NOT cover:

• 

Labor charges for set up of the unit.

• 

Product replacement because of misuse, accident, lightning damage, unauthorized repair or 

other cause not within the control of Wi-Ex®.

• 

Incidental or consequential damages resulting from the product. Some states do not allow 

the exclusion of incidental or consequential damages, so the above exclusion may not apply 

to you.

• 

Any modifications or other changes to the product, including but not limited to software or 

hardware modifications in any way other than as expressly authorized by Wi-Ex®  will void 

this limited warranty.

• 

Product that has been modified or adapted to enable it to operate in any country other than 

the country for which it was designed, manufactured, approved and/or authorized, or repair 

of products damaged by these modifications.

Warranty Information

Make sure you keep…

Please keep your sales receipt or other document showing proof of purchase. Attach it to this User 

Guide and keep both nearby. Also, keep the original box and packing material in case you need to 

return your product.

Before requesting repair service…

Make sure you have at least 15 feet of vertical separation between Signal Antenna and Base Unit 

and that the Signal Antenna is at least 3 feet above metal.

If red light is on, system is receiving signals from either the mobile device or the base station 

transceiver which are too strong for proper operation. Please unplug your system. Re-orient your 

Signal Antenna and/or Base Unit to reduce the excessive signal source. Plug your system back in. 

If still solid red, call customer support 1-800-871-1612.

To get warranty service…

Warranty service will be provided by Wi-Ex®. If you believe you need service for your unit, 

contact Wi-Ex® at 1-800-871-1612 or [email protected]. A representative will go through a 

diagnostic checklist with you. If it is determined that the product needs to be returned for service or 

exchanged, you will receive a return merchandise authorization (RMA) number. The representative 

will give you complete shipping details. Do not return products to Wi-Ex® without a Return 

Authorization Number (RMA).

Reminder

Record the model and serial number found on the product below:

Model #:_________________________________
Serial #: _________________________________
Purchase Date: ___________________________

Summary of Contents for YX560SL











Reviews: