USER
GUIDE
EN
Pam de penguin
sleeptrainer
with nightlight and wireless speaker
USE AS NIGHTLIGHT ONLY
SET TO NIGHTLIGHT ONLY MODE ................................................................................
Press button
D
for 3 seconds and select the sleeptraining OFF symbol.
= sleeptraining ON
= sleeptraining OFF, nightlight only
USE THE NIGHTLIGHT ......................................................................................................
• When going to bed, you can now use Pam as a comforting nightlight,
without him lighting up orange and green in the morning.
• Press the
A
button serveral times to switch on the light and choose your
preferred colour: blue, red, white, pink, multicolour, off.
For auto shut-off options see section
Light and sound settings
.
PLAY MUSIC VIA THE WIRELESS SPEAKER
CONNECT THE SPEAKER .................................................................................................
• Press button
B
and
D
for 3 seconds to switch ON the speaker.
The icon appears when switched ON.
• The icon appears and the light will flicker blue when switched ON.
• Look for ZAZU-PAM and press connect.
• When connected, you can play music via your mobile device.
Check our website for our ZAZU Spotify channel with specially selected playlists.
www.zazu-kids.nl/product/pam/
LIGHT AND SOUND SETTINGS
60 MINUTES AUTO SHUT-OFF .......................................................................................
Pam’s light and speaker can automatically switch off after 60 minutes. Activate
the timer by pressing
B
and
C
at the same time for 3 seconds. The light will
flicker green when it is switched ON and red when it is OFF. Pam will remember
the setting for the next day.
COLOURS ............................................................................................................................
By press button
A
several times, you can choose your own colour. Blue, red,
white, pink, multi-colour, off.
Note
Orange and green light in the morning are fixed and cannot be changed.
BRIGHTNESS.......................................................................................................................
Keep button
A
pressed and the brightness will change. Let go at the preferred
brightness. The setting will be remembered.
POWER SUPPLY
• Pam is supplied with a rechargeable battery, a charger base and a USB cable.
• To charge the battery, simply place Pam on the base and connect the USB
cable to a USB port. When Pam is being charged, the light will flicker twice.
• When the rechargeable battery is nearly empty, the battery icon on the display
will start blinking. You are advised to put Pam back on the charger base.
• Pam will be fully charged after around 5 hours.
• We advise to place Pam on the charger every morning, to make sure you
have enough battery life the next night.
Manufactured and distributed by ZAZU BV:
PO Box 299 | 3740 AG Baarn | The Netherlands
[email protected] |
zazu-kids.com
SAFETY INFORMATION
For your continued safety and the reliability of
your light, please observe the normal electrical
safety precautions:
• Do not immerse in water, For cleaning, but
wipe with a damp cloth. Unplug the charger
before cleaning.
• Do not use this product with a USB cable other
than the one supplied with it.
• Keep the packaging out of reach of children.
• Do not try to disassemble the light if it stops
working. Please contact our customer service.
• The rechargeable battery cannot be replaced.
• This ZAZU sleeptrainer is compliant with
the EU, US, CA, NZ, AUS legislation.
© zazu-kids 2018