Zaxcom ZMT3 Setup Menu
22
Low Battery Stop
Low battery stop will set the amount of time, after a low battery warning occurs, the on-board recorder will
close the current file and stop recording.
This is to prevent possible file corruption if the unit constantly powers off and on due to a dead battery.
NEVER STOP
- The onboard recorder will not stop recording unless it is manually stopped by a key press, or
when it receives a stop command via ZaxNet or if the battery dies.
Any interval from 1 to 99 minutes
- Once the battery indicator starts blink a low battery warning the
onboard recorder will continue to record for the time set here - then it will close the file and stop recording.
OLED Brightness Adjust
This setting adjusts the brightness of the OLED display. The brightness setting is from 0 to 3 with 3 being the
brightness.
OLED Display Dim
This setting adjusts the amount of time, after the last key press, that the OLED display will dim. The dim time
can be set to OFF in which the display will remain bright or any interval from 1 to 60 seconds.
Invert Display
Turning on inverted display will cause the OLED to display black characters on a white background.
Information Page
This page displays the current firmware version, the serial number, the DSP version, and the option code.
LOW BATT STOP:
NEVER STOP
- - - INFO - - -
FIRMWARE V1-37
SN: 1234 DSP:1B (ZHD)
OPT = 03
OLED BRIGHTNESS:
3
DISPLAY DIM:
OFF (NORMAL)
INVERT DISPLAY:
OFF