Zaxcom RX12 Right Side
5
Right Side
1
2
3 4
5 6 7
1.
UHF Antenna B RF Loop through RF Out -
The RF out is after the 35MHz filter and has 3dB of gain.
2.
External Power Connector (Hirose-4F)
Voltage range 10 to 18 VDC
3.
Audio Outputs for Modules 1 - 6 (TA-5M)
Each output can be configured to output analog or AES audio.
Please note when outputting more than two signals the modules will need to output an AES signal.
4.
QRX212 Module Position 6
5.
Power Switch
6.
Serial Communication Port
The Serial port is used to connect the RX12 to a Nomad, IFB200, TRX900CL or QRX with QIFB.
When connected the RX12 can send remote frequency and gain commands to the TRX transmitter.
7.
QRX212 Module Position 5
1
1
1
4
4
Summary of Contents for RX-12
Page 21: ...21...