Zaxcom Nomad User’s Manual_____________________________________________________Chapter 2
29
o
While in Record and press Stop
– TC for the start of the last Take.
If you just need to send running timecode to another device, set it to
Generator
.
If you want to control another timecode device with an Auto-Load capability, set it to
Card
.
Increment UBits
To set whether or not the user-bits will increment with each Take, press the
INCREMENT UBITS
button
and
select the appropriate choice.
UB Date Style
To set how the date, transmitted as part of the TC, is formatted, press the
UB DATE STYLE
button
and select the
appropriate choice.
ZaxNet Channel page
Page purpose:
This page controls how ZaxNet interfaces with wireless kits on each audio input channel.
How to get here:
(
ZNET
key
once)
Figure 2-11 ZaxNet Channel page
Once this page is being displayed, press one of the multi-function keys to select a channel to review and modify.
Bus Routing page
Page purpose:
This page manages the pages that indicate which input, if any, are routed to specific outputs.
How to get here:
(
BUS
key
)
Figure 2-12 Bus Routing page
