Zauber ECO-250, Manual

Page: 15 / 44

Page 15 of 44 Zauber ECO-250 © ZAU Grupp 2012 (ENG)
illustration of Control panel). Any one to be selected, its
indicator will flash, after a few minutes, the indicator will
be changed to illuminating. At this time, the appliance can
produce steam, you can use the steam for ironing.
Temperature dial
Turn the dial to set ironing temperature to meet the
garment changed.
Temperature indicator
When the iron is heating up, the temperature indicator
will be illuminated. Once the iron has reached the selected
temperature, it will extinguish. The temperature indicator
will be cycled on and off as the iron maintains the selected
temperature during ironing.
Steam release button
After pressing down the Power switch and choosing the
desired steam rate, it indicates the steam can be used for
ironing until the steam rate indicator is changed flashing
to illuminating. At this time, press the steam release
button with a little force, the steam will be sprayed from
the soleplate continuously. When loosen the steam release
button, the appliance can only be used for dry ironing
without steam.
Lack of water indicator
If less water in the tank, the indicator will be illuminated,
following with two “D” sounds of buzzer, the steam
generator stops working. It prompts you need to add
water into the tank.
Descaling indicator
If the descaling indicator illuminating, it indicates the
steam generator shall be cleaned by virtue of the mineral
deposits collecting to a degree. When the system ensures
the mineral deposits have been removed, the indicator will
be extinguished.
Drain water cap
Open the cap for cleaning the steam generator.
Cord clamp
When not in use, the steam supply hose and power cord