Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 71 / 96

71 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3
Corrective maintenance
Corrective maintenance operations must be carried out by a Mechanical technician , unless
otherwise specified�
before replacing the bolts, thoroughly clean the through holes, the screws and their nuts in
order to remove dirt, grease, and oil that would compromise their seal.
do not use pins and shims unless supplied by the Manufacturer�
Corrective maintenance work includes:
∂ adjusting the clutches (refer to “7.2.3.1 adjusting the clutch” on page 72 );
∂ rotating the main blades (refer to “7.2.3.2 rotating the main blades” on page 73 );
∂ replacing the main blades (refer to “7.2.3.3 replacing the main blades” on page 74 );
∂ adjusting the main jaw blades (refer to “7.2.3.4 adjusting the main blades on the jaw” on page 76 );
∂ rotating the razor blade (refer to “7.2.3.5 rotating the razor blade” on page 77 );
∂ replacing the razor blade (refer to “7.2.3.6 replacing the razor blade” on page 79 );
∂ rotating the guide blades (refer to “7.2.3.7 rotating the guide blades” on page 80 );
∂ replacing the guide blades (refer to “7.2.3.8 replacing the guide blades” on page 82 );
∂ adjusting the guide blades (refer to “7.2.3.9 adjusting the guide blades” on page 83 );
∂ replacing the upper jaws (refer to “7.2.3.10 replacing the upper jaws” on page 84 );