Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 16 / 96

16 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
2.7
rECIpIENts of thE MaNual aNd tasks
This Manual is intended for the following professional figures:
MANAGER
Personnel of the Customer, in charge of making sure that all the intended attachment operations
are carried out correctly, in compliance with the instructions provided in this Manual and the
machine manual, as well as with general safety regulations� For a detailed description of the
responsibilities, refer to
“3.4 General regulations - responsibilities” on page 21 �
OPERATOR
Personnel of the Customer, who performs tasks regarding normal machine and attachment use
according to the instructions provided in
“3.4 General regulations - responsibilities” on page
21 and in the machine manual�
QUALIFIED TECHNICIAN
Personnel made available by the Customer, having the technical-professional requisites to
perform specialist operations in the various phases of the machine and attachment life cycle,
in compliance with the instructions in this Manual and in the machine manual, as well as with
general safety regulations� The specialisation required will be indicated for each operation�
MANUFACTURER'S TECHNICIAN
Personnel employed or authorised by the Manufacturer, having the technical-professional
requisites to perform specialist operations which require in-depth knowledge of the attachment
and how it operates�
2.8
GENEral warNINGs
2.8.1
Customer's responsibilities
Unless specific contractual conditions are implemented, the Customer must:
∂ adequately train their personnel who will be required to operate on the attachment for various reasons
as indicated in “3.1 General regulations - personnel training” on page 20 ;
∂ verify that the consignment matches the order specifications upon delivery;
∂ provide an appropriate hydraulic system on the machine, compatible with the hydraulic features of the
attachment reported in “4.7.1 hydraulic features” on page 30 ;
∂ provide adequate attachment lifting and handling equipment;
∂ check consistency between machine dimensions (barycentre position, stabilising moment) and
attachment dimensions reported in “4.7 specifications” on page 30 �
∂ provide carbon dioxide and powder fire extinguishers near the work area;
∂ set up an "out-of-service" sign during maintenance and attachment downtime, which indicates that the
attachment is not running and forbids unauthorised people from using the attachment;
∂ guarantee the availability of the tools, consumables and lubricants required to correctly carry out all the
activities specified in this Manual;
∂ organise the disposal of the packaging material in compliance with the regulations in force in the Country
where the attachment is installed and used;
∂ forbid access to people not involved with the work and operations of the various phases of the attachment
life cycle;