Thank you very much for purchasing the portable spray disinfectant
manufacturing machine developed by our company . To ensure that you
use the device correctly , please read the instructions carefully before
use.
Product name
Portable Spray Disinfectant Manufacturing Machine
Sodium hypochlorite generator
Model
Power Supply
DC5V
Running time
3min
，
6min
，
10min
Concentration
200~300ppm
，
500~600ppm
，
800~1000ppm
Texture of material
304stainless steel
、
PC
、
ABS
Capacity
270ml
Product size
9.2cm×7.45cm×24.5cm
Net weight
246g
Executive standard
Q/JX01 -2012
、
WS628 -2018
Bactericidal rate
99.99%
Rate of removing
agricultural residues
93.6%~95.8%
Killing microorganism
category
Escherichia coli, Staphylococcus aureus,
Candida albicans, Pseudomonas aeruginosa,
poliovirus
1. Check that the bottle is clean and free of foreign matters.
2. Measure the salt with a salt spoon and put it into the bottle.
3. Add clear water to the bottle body to the highest water level, and
shake the bottle body to make the salt completely dissolve in the
water. Note: before working, loosen the spray gun to let the gas
produced by electrolysis out.
4. Connect the USB end of the power cord to the 5V adapter, and the
round plug end to the power hole of the base. At this time, the buzzer
rings, which means the connection is normal.
5. Press the power button in the middle of the base and the buzzer will
sound. At this time, it can be observed that the base lamp is on and
bubbles appear in the bottle, indicating the normal operation of the
machine. (press the switch once for 3 minutes, press the switch twice
for 6 minutes, and press the switch three times for 10 minutes).
6. After the completion of the work, the machine automatically stops
working, at this time, the buzzer rings five times, indicating that the
preparation of disinfectant has been completed.
7. Unplug the power cord from the equipment and use the disinfectant
correctly according to the actual use.
8. Clean the disinfectant in the bottle with clear water and dry it.
The principle of disinfection and virus killing of sodium hypochlorite
disinfectant is mainly to release new ecological oxygen [O], denature
the protein and other substances on the bacteria and virus, and oxidize
the organic macromolecules such as bacteria (virus) body protein,
nucleic acid and enzyme, so as to kill the pathogenic microorganism. At
the same time, in the process of sterilization, the osmotic pressure of
bacteria and viruses is changed, and the bacteria and viruses lose their
activity and die.
S odium hypochlorite dis infectant can effectively kill bacteria,
mycobacteria, fungi, viruses and bacterial spores, with a killing rate of
99.99%.
In addition, sodium hypochlorite can also decompose the residual
pesticides in vegetables, fruits and other agricultural and sideline
products. Most pesticides are made up of organic compounds, which
can be oxidized and decomposed by the new oxygen released by
sodium hypochlorite. The disinfectant produced by sodium hypochlorite
generator does not produce free chlorine, and will not form carcinogens
harmful to human health due to the presence of free chlorine; it will not
cause damage and toxicity to life.
Sodium hypochlorite generator
Non-toxic
Harmless
No residue
Pollution-free
Operating Manual
Sprayer Nozzle
Bottle
Base
6g Salt Spoon
Charging Cable
Button Switch
Charging Hole
Introduction
P roduc t p a ra meters
Parts details
Usage method
Principle of sterilization
1. The portable spray disinfectant manufacturing machine (sodium
hypochlorite generator) should be used in time after each work is
completed. Do not electrolyze many times to prevent unknown
concentration.
2. When it is found that the bubbles generated by the electrolytic cell
during the work are significantly reduced, or when there is obvious
white solid condensate, pour appropriate amount of warm water and
sodium citrate descaler into the cup, soak the electrolytic cell, and let
it stand for 1 ~ After 2 hours, pour out the water and wash it with
clean water .
Maintenance
Portable Spray Disinfectant
Manufacturing Machine
It only ta kes 3 m inutes t o
ma ke t he d is infecta nt.
3. When working, the base lamp lights up and flashes to indicate that
the salt concentration is too high, and the device enters a state of
self-protection. At this time, the water needs to be diluted, or the
amount of salt is appropriately reduced during subsequent use.
4. There is a slight deviation in the output voltage of the charger
. In
addition, the water quality in each region is dif ferent, and the mineral
content is more or less. The concentration of the disinfectant
generated will eventually vary .
ZSHG 01
ZSHG 01