zapco ZX-10KD, Owner'S Manual, Page: 12 / 16

MASTER
SLAVE
MASTER
OUTPUT SLAVE
INPUT
0.2V 70Hz 12dB 90Hz 250Hz 180 10V 10Hz 0dB 30Hz 30Hz 0
REMOTE
SPEAKER OUTPUTS
GAIN
SUB
SONIC
BASS
BOOST
BASS
FREQ. LPF
PHASE
SHIFT
INPUT
CH1 CH2
OUTPUT
CH1 CH2
DAISY-CHAIN
PWR
PRT
MASTER
SLAVE
MASTER
OUTPUT SLAVE
INPUT
0.2V 70Hz 12dB 90Hz 250Hz 180 10V 10Hz 0dB 30Hz 30Hz 0
REMOTE
SPEAKER OUTPUTS
GAIN
SUB
SONIC
BASS
BOOST
BASS
FREQ. LPF
PHASE
SHIFT
INPUT
CH1 CH2
OUTPUT
CH1 CH2
DAISY-CHAIN
PWR
PRT
Use 8 Gauge(AWG) wire cable
2~8 ohms
Using a dual amplifier configuration, the MASTER amplifier has total control over the SLAVE
amplifier. The positive terminal of the subwoofer's voice coil must be connected to the
positive terminal of the MASTER Amplifier and the negative terminal of the subwoofer's
voice coil must be connected to positive terminal of the SLAVE Amplifier. Since the dual
amplifier configuration has tremendous output potential, please ensure that your subwoofers
can handle such a large amount of power.
When utilizing the dual amplifier configuration, it is important to note that the
connected speakers' load cannot be lower than 2 ohms. Connecting a lower
impedance load can damage the amplifier and void your warranty.
Caution
"MASTER UNIT"
"SLAVE UNIT"
ZX-6.5KD / 10KD
Dual Amplifier Speaker Connection
-8-
SPEAKER CONNECTION