Isostand
MKII
Page 1: ...Isostand MKII...
Page 2: ...an enjoy the comfort of your new acquisition you need to assemble it We have tried to give you as much detail as needed and as little as possible Should you run into any difficulty with this assembly...
Page 3: ...attach the base plate 1 to the stem aligning the holes and inserts in both parts and fixate using the hex screws ph Step 2 Set up the stand as shown Lower down the connecting panel Attach using the h...
Page 4: ...using abrasive cleaners PRODUCT CAN BE ASSEMBLED BY ONE PERSON Attention It is very important that after finishing installation and setting up the desired height of the Isostand you fasten the mechani...
