background image

2. Connect the wire coloured blue to the terminal

either marked with the letter “N“ or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or coloured

red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

VENTILATION REQUIREMENTS

CAUTION! Appliance must be

installed according to installation

instruction in order to ensure required

ventilation.

DOOR REVERSIBILITY
Please refer to the separate document with

instructions on installation and door reversal.

CAUTION! At every stage of reversing

the door protect the floor from

scratching with a durable material.

CONTROL PANEL

SWITCHING ON

1. Insert the plug into the wall socket.

2. Turn the temperature regulator clockwise to a

medium setting.

SWITCHING OFF
To turn off the appliance, turn the temperature

regulator to the "O" position.

TEMPERATURE REGULATION
The temperature is regulated automatically.

However, you can set a temperature inside the

appliance yourself.
Choose the setting keeping in mind that the

temperature inside the appliance depends on:

• room temperature,

• frequency of opening the door,

• quantity of food stored,

• appliance location.
A medium setting is generally the most suitable

one.
To operate the appliance:

1. Turn the temperature regulator clockwise to

obtain a lower temperature inside the

appliance.

2. Turn the temperature regulator

counterclockwise to obtain a higher

temperature inside the appliance.

DAILY USE

CAUTION! This refrigerating

appliance is not suitable for freezing

foodstuffs.

POSITIONING THE DOOR SHELVES
To permit storage of food packages of various

sizes, the door shelves can be placed at different

heights.

1. Gradually pull the shelf up until it comes free.

2. Reposition as required.

7

Summary of Contents for ZXAE82FR

















Reviews: