3 pin
Min. 60 cm (23.6”)
Min. 90 cm (35.4”)
The drain hose may be extended to a maximum of 4 me-
tres. An additional drain hose and joining piece is availa-
ble from your local Service Force Centre. The joining
piece must have an internal diameter of 18 mm.
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly in to the
standpipe.
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove any
blanking plug that may be in place.
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose (see dia-
gram) to prevent waste from the sink entering the appli-
ance.
If you intend to drain the hose from the machine into a
sink, make sure that the sink is empty and the plug hole is
not blocked.
Use the plastic “U - Piece” supplied.
31
Summary of Contents for ZWD 14791 W
Page 1: ...EN User manual Washer dryer ZWD 14791 W ...
Page 35: ...35 ...
