background image

12

If you are unable to remedy the 
problem by following the above 
suggestions, please contact your 
local Service Force Centre.

1

Warning!

 Repairs to the appliance are 

only to be carried out by qualified service 

engineers. Considerable danger to the 

user may result from improper repairs. 

3

If the appliance has been operated incor-

rectly, the engineer's visit will be chargea-

ble, even during the warranty period.

Disposal

2

Packaging material

The packaging materials are environmen-

tally friendly and can be recycled. The 

plastic components are identified by mark-

ings, e.g. >PE<, >PS<, etc. Please dis-

pose of the packaging materials in the 

appropriate container at your local waste 

disposal facilities.

2

Old appliance

The symbol 

W

 on the product or on its 

packaging indicates that this product may 

not be treated as household waste. In-

stead it shall be handed over to the appli-

cable collection point for the recycling of 

electrical and electronic equipment. By en-

suring this product is disposed of correctly, 

you will help prevent potential negative 

consequences for the environment and hu-

man health, which could otherwise be 

caused by inappropriate waste handling of 

this product. For more detailed information 

about recycling of this product, please con-

tact your local city office, your household 

waste disposal service or the shop where 

you purchased the product.

 is lit

Overheating protection for the cook-

ing zone has been triggered

Switch off the cooking zone. Switch 

the cooking zone on again

Automatic switch off has been trig-

gered

Switch off the cooking zone. Switch 

the cooking zone on again

 and number are displayed

Electronics fault

Disconnect the appliance from the 

electrical supply for a few minutes 

(Take the fuse out of the house’s wir-

ing system)

If after switching on again, 

 is dis-

played again, call the customer 

service department

Problem

Possible cause

Remedy

Summary of Contents for ZVT 64 X





















Reviews: