46
Press in the joint covers between the appliance
and the kitchen unit.
Apply covers (B) on joint cover lugs and into hinge
holes.
Position the runners (H) at the top and bottom of
the inside of the kitchen unit as shown in Fig. and
mark the position of the external holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3.5x16 mm screws.
D724
D726
B
PR33
20mm
A
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
D265
A
D
C
D723
If after having carried out the previously described
operation there is still some space left between the
appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop
strip (A).
Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
