45
THE SAFETY THERMOSTAT
This oven is provided with a safety thermostat. In case
of malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power
supply to the appliance. If this happens, call your local
Zanussi Service Centre. Under no circumstances should
you attempt to repair the appliance yourself.
HOTPLATE CONTROL KNOBS
The Control Knobs for the hotplates (Fig. 2) can be found
on the Oven Control Panel.
The energy regulator of the hotplates can be set by
means of a 7 positions control knob.
0 = OFF
1 = MINIMUM
3 = MAXIMUM
The intermediate positions give an increasing heating
power.
Carefully supervise cookings with fats or oil, since
these types of foodstuff can result in a fire, when over-
heated.
WHEN THE OVEN IS FIRST INSTALLED
Once the oven has been installed:
a) set the thermostat knob to MAX;
b) switch the oven function control knob to
conventional cooking (
);
c) allow the oven to run empty for approximately
45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Once this operation is carried out, let the oven cool
down, then clean the oven cavity with a soft cloth soaked
in warm soapy water.
Before cooking for the first time, carefully wash the
shelf and the dripping pan.
FO 2161
Fig. 3
0
1
2
3
FO 2167
Fig. 2
To open the oven door, always catch
the handle in its central part (Fig. 3).
