3. Screw it to the base cover with a cross
screwdriver.
DOOR REVERSIBILITY
WARNING! Before carrying out any
operations, remove the plug from the
power socket.
1. Make sure the appliance stands upright.
2. Open the door and remove the door
equipment. Refer to "Daily Use" chapter. Close
the door.
3. Unscrew the screws on the back of the top
cover.
4. Lift the top cover and place it on a soft surface.
5. Unscrew the 4 screws.
6. Lift the upper hinge and put it in a safe place
together with the screws.
7. Lift the door and put it on a soft surface.
8. Tilt the appliance carefully on a soft foam
packaging or similar material to avoid any
damage to the back of the appliance and the
floor.
9. Unscrew the screws of the bottom hinge and
adjustable feet.
10. Install the pin in the opposite hole of the hinge.
11. Screw the bottom hinge on the other side of
the appliance.
12. Install the rubber support on the side with no
hinge.
13. Fit the door on the lower hinge making sure the
hinge pin enters the door bottom hole.
14. Install the upper hinge on the opposite side of
the appliance. Fit the upper hinge pin into the
door upper hole. Tighten the screws.
15. Screw the remaining 2 screws on the top side
of the appliance with no hinge.
16. Place the top cover on the appliance and
tighten the screws on the back.
Install the door equipment.
65
