Zanussi ZD21/6R3 User Manual Download Page 1

16

m

These domestic refrigerators are designed to be

used specifically for the storage and conserva-
tion of food. 

m

DO NOT USE SHARP INSTRUMENTS to

scrap off frost or ice. Frost may be removed by
using a plastic scraper. (See defrosting instruc-
tions). 

m

Frozen food must not be re-frozen once it has

been thawed out. 

m

Manufacturer’s storage recommendations

should be strictly complied with.

m

Lollies can cause frost burns if consumed right

away from the freezer.

m

Do not place carbonate or fizzy drinks in the

freezer as these may explode.

m

When an old freezer is to be discarded make

sure to:

m

Dismount the doors in order to prevent chil-
dren from getting trapped inside.

Have the gas from the cooling system with-
drawn before making it to scrap iron.

The symbol     on the product or on its pac-
kaging indicates that this product may not be
treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and elec-
tronic equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.

m

m

Warnings for your safety

Warnings for your safety. Carefully read
these instructions before installing and
using the machine.

m

This freezer is designed to be operated by adults

only. Children should not be allowed to tamper with
the controls or play with the product. 

m

Make sure that the power plug is not squashed or
damaged by the back of the fridge/freezer. Do not
place heavy articles or the fridge/freezer itself on
the power cord. Do not remove the power cord by
pulling on its lead, particularly when the fridge/fre-
ezer is being pulled out of its niche. If the power
plug socket is loose, do not insert the power plug. If
the power cord is damaged, it must be replaced by
a certified service agent or qualified service person-
nel. Damage to the cord may cause a
shortcircuit,fire and/or electric shock.

m

This appliance is heavy. Care should be taken when

moving it.

m

Repairs carried out by inexperienced persons may

cause injuries or serious malfunctioning. Refer to
the nearest Authorized Dealer. 

m

Make sure the rear part of the appliance stands

against a wall as there are working parts which heat
up and should not be of easy access. 

m

Make sure that there is a continous and adequate

ventilation as a failure to do so may result in dama-
ge to the appliance or deterioration of the food. 

m

The appliance should be left for at least 4 hours

after installation before it is turned on ill order to
allow the refrigerant to settle. 

m

This product must be serviced only by an AUTHO-

RIZED DEALER, and only GENUINE SPARE
PARTS must be employed. 

m

Before cleaning or reparing the appliance, 

make

sure it is unplugged. 

m

It is dangerous to alter the specifications or modify

this product in any way. 

Summary of Contents for ZD21/6R3
















Reviews: