background image

35

ENGLISH

8. Spin speed selector dial or 

no spin / 

rinse hold options

FA 878E

FA 678E

This dial allows the reduction of the final and the
intermediate spin speed or to select

NO SPIN or

RINSE HOLD options.

The speeds on the dials refer to cotton programmes. 

The position 800 r.p.m. (FA878E) corresponds to
700 r.p.m. for delicates.

Position 500 r.p.m. is common for all fabrics.

NO SPIN: by selecting this option all the

spinning phases are turned off. To be used for
extremely delicate items. The washing machine will
add 3 rinses in the cotton programmes and 1 rinse
in the synthetics programmes.

RINSE HOLD: by selecting this option, the

water of the last rinse is not drained, in order to
prevent the fabrics from wrinkling. When the
programme has finished, FIN light will illuminate.

To drain the water follow these three steps:
A) Turn the programme selector dial to “

O

”.

B) Select 

DRAIN or 

SPIN programme.

C) Press INICIO / PAUSA button.

• If you need to stop the machine to put in more
laundry (having selected DELAY START option
first), proceed as follows:

1. Depress START / PAUSE button.

2. Turn the dial programme selector to position “

O

”.

3. Wait two or three minutes before opening the

door to give the electric locking mechanism
time to release.

4. Place the laundry in the drum.

5. Follow the normal operating sequence to select a

programme.

DELAY START OPTION CAN'T BE SELECTED
WITH

SPIN and

DRAIN programmes.

7. Programme progress display

When DELAY START option is chosen, the light
relevant to the selected delay lights up.

After the machine has started, the remaining time is
shown by the corresponding indicator light.
During programme cycle the light WASHING will
remain lit.

The light END will illuminate to indicate that the
selected programme has finished.

The light END flashes in the event of operating
problems: 
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.

Summary of Contents for FA1084E





























Reviews: