INSTALLATION MANUAL
Refrigeration unit
Series Uno Undermount
UN120 | UN120 Multi
24
rev.02
3.4 Unpacking the unit
To unpack the unit proceed as follows:
Carefully remove the upper and side structures of the packaging crate, then remove the lower
panel and the installation kit components supplied with the unit.
Remove the coatings and accessories of the unit present
Attach the unit, using the holes in the supports (A, Figure 22), to a suitable lifting device and lift it
slightly.
Figure 22 - Anchor brackets
Remove the screws that fix the unit to the packaging crate.
Remove the two rear stations of the packaging crate and lift the unit from the base at a height of
about 300 mm [11.81 in].
Remove the four mounting bolts that fix the two vertical columns to the unit.
The unit is ready to be installed.
