ZANOLLI SYNTHESIS 08/50 V PW GAS, Manual For Installation

Page: 29 / 68

7. SAFETY WARNINGS
SYNTHESIS GAS 29
- carry out all working procedures with the utmost safety and calm;
- respect the instructions and warnings highlighted by the signs on the
equipment. These signs are to prevent accidents and must always be
perfectly legible. Whenever they are damaged or illegible it is obligatory
to replace them by requesting the original part from the manufacturer;
- disconnect the electricity supply after the appliance has been used,
- before carrying out cleaning or maintenance.
ATTENTION! Whilst the machine is working it is forbidden to
remove the safety protection seeing that its parts are moving. These
could cause injury to hands.
In the case of fire do not use liquid extinguishing agents but only
those in powder form
7.1.3. Warnings for the maintenance operator
Disconnect the electricity supply before working on electrical or
electronic parts or connections.
- Always use personal safety devices and other means of protection.
- Before beginning any maintenance operations make sure that the
equipment has cooled down if it has just been used.
- Should one of the safety devices not work or not be set correctly the
appliance must be considered out of order.